How to Get Sticker Residue Off Golf Club | Best Alternatives

How to Get Sticker Residue Off Golf Club

As a golf aficionado, I take great pride in keeping my clubs in pristine condition. But after one tournament, I noticed an embarrassing residue left on my beloved 7-iron from a sticker that had been peeled off. I panicked and thought I was doomed to a lifetime of sticky clubs. However, with a little research and experimentation, I discovered the perfect solution for how to get sticker residue off golf clubs & banish sticker residue for good! In this post, I’ll share my tried-and-true tips for getting sticker residue off your golf clubs, so you too can confidently step out on the green.

How to Get Sticker Residue Off Golf Club?

As a golf enthusiast, I know how important it is to keep our golf clubs in good shape. Unfortunately, sometimes we end up with sticker residue on our golf clubs without even realizing how it got there. So, do golf clubs wear out with sticker residue? Maybe Yes, Maybe No. It can be frustrating to see those stubborn marks on our precious equipment, but don’t worry, Here are some of the methods I’ve tested and tried over time that work like a charm. Read on to learn how to get sticker residue off golf clubs & clean your golf clubs to make it new again.

Method 1: Warm Water and Soap

The first and easiest method to remove sticker residue is to soak the club in warm water and soap. Fill a bucket with warm water and add a few drops of dish soap. Submerge the club in the bucket for about 10-15 minutes, or until the sticker residue has softened. Gently rub the sticker residue with a soft cloth or a toothbrush. Rinse the club with clean water and dry it with a towel.

Method 2: Rubbing Alcohol Method

Rubbing alcohol is known to dissolve adhesives, and it’s one of the easiest and cheapest ways to remove sticker residue. Dip a cotton ball or a cloth into some rubbing alcohol and start rubbing the sticky area vigorously until the residue breaks down. Then, wipe off the residue with a clean cloth or paper towel.

Method 3: WD-40

Believe it or not, WD-40 can be a lifesaver in removing sticker residue from golf clubs. Spray some WD-40 on the sticker residue and let it sit for a few minutes. Use a soft cloth to rub the residue off. Repeat the process if necessary. Once the residue is removed, clean the club with soap and water, and dry it with a towel.

Method 4: Goo Gone

Goo Gone is a specialized product for removing sticky residues. Apply Goo Gone onto a cloth and rub it onto the affected area. Gently scrub in a circular motion until the sticker residue dissolves. Dry the club with a clean cloth. Be aware that Goo Gone is also a chemical solvent that can damage the club’s paint if left on for too long, so it is important not to leave it on for an extended period of time.

Method 5: Heat Gun Method

If you have a heat gun, you can use it to melt the adhesive and soften it, making it easier to remove. Hold the heat gun about 5-6 inches away from the residue and heat it for a few seconds. Then, use a clean cloth and wipe off the residue gently. Repeat this process until the residue is gone. Moreover, this will also lead to a reduction in your average golf club weight with a better swing guaranteed.

Method 6: Vinegar

Vinegar has a powerful cleaning property and can help remove sticker residue from your golf club. Follow these steps:

  • Soak a clean cloth in vinegar. Wipe the cloth on the sticker residue.
  • Scrub gently until the residue starts to come off. You can use the golf club polish on that area for a brighter look. 
  • Repeat as needed until all of the residue is gone.

For your convenience, I have put up a table on how to get sticker residue off golf clubs with easy-to-read instructions along with their pros and cons. Get all the insights below.

Warm Water and Soap1. Mix warm water and mild soap
2. Soak a cloth in a solution
3. Rub the affected area
4. Rinse with warm water and dry
Mild and non-toxic solution
May not be effective for tough residue
Rubbing Alcohol Method1. Apply rubbing alcohol on a cloth or cotton ball
2. Rub the affected area
3. Rinse with warm water and dry
Effective for tough residueAffordable
May damage the club’s finish or paint
May dry out grips
WD-401. Spray a small amount on a cloth
2. Rub the affected area
3. Wipe clean with a damp cloth
4. Dry thoroughly
Effective for stubborn residue
May damage the club’s finish or paint
May affect grip
Goo Gone1. Apply Goo Gone on a cloth
2. Rub the affected area
3. Wipe clean with a damp cloth
4. Dry thoroughly
Effective for tough residue
Suitable for different surfaces
May damage the club’s finish or paint
May affect grip
Heat Gun Method1. Set the heat gun on low setting
2. Direct heat to the affected area
3. Use a plastic scraper to remove residue
Fast and efficient
Effective for tough residue
May damage the club’s finish or paint
Require caution and care
Vinegar1. Mix equal parts vinegar and water
2. Soak a cloth in the solution
3. Rub the affected area
4. Rinse with warm water and dry
Mild and non-toxic solution
Effective for mild residue
May not be effective for tough residue
May require repeated applications
Mobile users swap the table from right to left to view the complete table

Note: Always test the method on a small and inconspicuous area before doing the entire golf club. Avoid using abrasive materials or tools that may scratch, damage or bend the golf clubs. Use caution and wear protective gear when using a heat gun.

How to Remove Sticky Residue from Iron?

7,8,9 golf irons

I remember a time when I was playing golf, and my irons kept sticking to the ball. I was at my wit’s end, but then I remembered an easy “ how to remove sticker from golf club iron “ technique learned from a YouTuber in my early days. I went home and soaked my irons, made a baking soda mixture, and scrubbed all the sticky residue off. Now, my irons are cleaner and launch the ball much smoother.

One of the most common problems that I see amongst golfers is a sticky residue on their irons. Sometimes, even the best golfers have to deal with this pesky problem. So, here is a step-by-step guide on removing sticky residue from iron.

  • First, gather your supplies. You will need a soft-bristled brush, warm water, a mild dish detergent, and a microfiber towel.
  • Begin by soaking your irons in a basin or sink of warm water. This will help to loosen any sticky residue that may be stuck on the clubs.
  • Next, add a small amount of mild dish detergent to the water and use the soft-bristled brush to scrub the irons. Be gentle and apply light pressure to ensure that you do not damage the clubface or the golf club grip.
  • Rinse off the soap and residue with warm water and dry the irons with the microfiber towel.
  • For stubborn sticky residue, you can try using a mixture of baking soda and water. Apply the mixture to the dirty area, let it sit for 10-15 minutes, and scrub with the soft-bristled brush. Rinse with warm water and dry with a microfiber towel.
  • Lastly, use a protective spray or wax to prevent future sticky residue build-up on your irons.

By following our step-by-step guide on how to get stickers off golf clubs & irons, you’ll be able to get rid of any sticky residue on your clubface. So, next time you hit the greens, make sure you’ve cleared all the stickiness off your clubs, show a good golf club display and enjoy a smoother swing.

YouTube video via Dub Golf

Should You Remove Stickers from the Golf Club Shafts?

I am often asked whether stickers should be removed from golf club shafts. The short answer is yes, you should remove them – but let me explain why.

  • Firstly, stickers on the shaft can cause distractions during your swing. This may seem like a trivial matter, but any little distraction can affect your swing accuracy and ultimately your gameplay.
  • Secondly, stickers make it harder to grip the club properly. The paste from the stickers can create clumps and bumps that interfere with your grip on the shaft. You want a smooth surface to grip consistently every time you swing. Removing the stickers allows you to properly hold the club with full control.
  • Lastly, stickers can interfere with your custom fitting. Custom fitting is a crucial process for optimizing your clubs to suit your swing style. Stickers obstruct the shaft’s surface, making it harder to measure and fit the shaft correctly. As someone who’s gone through the process of getting custom-fitted clubs, I can tell you that every detail counts.

Trust me, as someone who’s spent countless hours on the golf course, every detail can make a difference, and removing stickers is one detail you don’t want to overlook. So, get all the supplies and use our techniques on how to remove stickers from golf clubs now.

Sticker Residue on Golf Clubs| Minor But Major Impact 

Well, folks, that’s a wrap! We’ve covered all the tried-and-true methods for removing sticky residue from iron & golf clubs. As a golfer myself, I know how frustrating it can be to see that stubborn adhesive gunk clinging to your trusty club.

But fear not, because now you’ve got a whole arsenal of solutions on how to get sticker residue off the golf club at your disposal. Whether you choose to use rubbing alcohol, Goo Gone, vinegar, or even just some good old baking soda, you can rest easy knowing you won’t be stuck with sticker residue forever.

And speaking of easy, here’s my final piece of advice: don’t let sticker residue (or anything else for that matter) get in the way of your golf game. Take care of your equipment, measure the golf club loft, stay focused, get your technique right & keep striving for greatness on the green.

Thanks for tuning in, everyone! And don’t forget to follow GolfAceNation for more helpful tips and tricks for golf enthusiasts like ourselves. Until next time, Happy Golfing.

Frequently Asked Questions

Q1. How do you remove dried sticker residue from metal?

When faced with this problem, my go-to solution is white vinegar. Simply soak a cloth in vinegar and place it over the adhesive, letting it sit for a few minutes. Once the vinegar has had a chance to work its magic, gently scrub the area with a soft-bristled brush or cloth. Your metal surfaces will be shiny and free of any pesky residue

Q2. Can you use Goo Gone on golf clubs?

So, how to get sticker residue off golf club with Goo Gone? It is quite safe for metal surfaces, so it won’t harm the metal shaft or clubheads. However, it’s important to avoid getting it on any painted or coated areas, as it could cause damage. To use Goo Gone on your golf clubs, simply apply a small amount to a cloth or cotton swab and gently rub the adhesive until it dissolves. Then, rinse the area thoroughly with water and dry it with a soft cloth.

Q3. What else can you use instead of Goo Gone?

For removing sticky residue from iron & golf clubs other than using Goo Gone, one option is using rubbing alcohol or nail polish remover. Both contain a chemical solvent that can dissolve adhesive residue effectively. Another alternative is using peanut butter, which sounds odd but works wonders due to the natural oils found in it that can break down the stickiness. Furthermore, some golfers swear by using a magic eraser or WD-40 to clean their clubs. All in all, you can keep these things as part of your golf bag setup but remember to take caution while using them.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top