How to Hit a Draw in Golf? Well, let me tell you – it’s not a walk in the park. But then again, neither is actual golfing for that matter. I remember the first time I tried to pull off a draw shot – it was on the 9th hole and I was stuck in the rough. I lined up my shot, took a deep breath, swung hard, and – to everyone’s amusement – hit the ball straight into the water. And that folks, is how NOT to hit a draw in golf. Lucky for you, I’m here to share my expertise on the proper way to hit a draw shot. So grab your clubs and let’s get started!
- How to Hit a Draw in Golf | 4-Step Instructions
- What is a Draw in Golf?
- What Causes a Draw in Golf?
- Step 1: Aim Right
- Step 2: Close Clubface
- Step 3: Swing with Inside-Out Path
- Step 4: Shift Weight and Rotate Body
- How to Hit a Draw with a Driver | A Step-by-Step Guide
- How to Hit a Draw with Irons?
- How to Draw a Golf Ball?
- How to Fix a Draw in Golf?
- Draw Vs Fade: What’s the Difference?
- Ready to Hit a Draw Every Time !!!
How to Hit a Draw in Golf | 4-Step Instructions
I’ve seen many players struggle with hitting a draw. While hitting a straight shot off the tee or fairway may seem like the best option, sometimes a draw shot can be just what you need to get around a challenging course.
To achieve this shot,
1. Start by aiming right at your target.
2. Close the clubface slightly at setup.
3. During your swing, focus on an inside-out path.
4. Shift your weight to your front foot while rotating your body through impact.
For more in-depth guidance, follow our guide for step-by-step instructions and additional insights on hitting a golf draw.
Before we dive into how to hit a draw in detail, it’s important to understand what is a draw in golf.
What is a Draw in Golf?
A draw is a shot that starts to the right of the target, then curves to the left. This means that for a right-handed golfer, the ball will be aimed to the right of the target and then curve back toward the center of the fairway or green. A draw shot is often preferred by golfers as it can add extra distance to your shots and can be useful when trying to get around obstacles such as trees or bunkers.
What Causes a Draw in Golf?
Now that we know the draw in golf meaning and the basic info., let’s talk about what causes it. Several factors contribute to hitting a draw shot.
- One of the main factors is the clubface angle. A closed clubface at impact will make the ball spin left, causing a draw shot.
- Another factor is the swing path. A golfer with an inside-out swing path or a swing path that is more to the right of the target line will typically hit a draw.
- Finally, weight distribution and body rotation during the swing can also contribute to hitting a draw shot.
Now that we understand what is a draw shot & its causes, let’s dive into the steps necessary to hit a draw shot.
Step 1: Aim Right
The first step to hitting a draw shot is to aim your setup to the right of the target. For a right-handed golfer, this means setting up with your feet, hips, and shoulders aiming to the right. This will allow you to create an inside-out swing path for a draw.
Step 2: Close Clubface
The second step is to close the clubface at the address. This means that you need to aim your golf clubface pointing slightly to the left of the target. This helps create the spin necessary to achieve a draw shot. Be mindful not to over-close the clubface, as this can cause a hook, which is a shot that starts left of the target and continues left. Also, your golf grip for the drawing must be strong to ensure that the hands rotate with the clubface closed through the impact.
Step 3: Swing with Inside-Out Path
It took me a while to master the technique for a draw shot. I found that practicing with a slower tempo helped me focus on swing path and control, rather than on hitting the ball as far as possible.
The key is to swing with an inside-out path. To swing inside out, imagine your swing path going from the inside of your body to the outside, away from the target. This will create the curvature necessary to hit a draw shot. In addition, focus on hitting the ball with an upward angle of attack, which will increase the launch angle and reduce spin.
Step 4: Shift Weight and Rotate Body
The final step is to shift your weight and rotate your body during the swing. Start with a slightly closed stance and tilt your spine to the right. As you begin your backswing, shift your weight to your right foot. On the downswing, shift your weight to your left foot and rotate your body towards the target. This will help produce an inside-out swing club path for a draw & create the spin necessary to hit a draw shot.
In my personal experience, I find that the easiest way to hit a draw is to stay relaxed and focused during the swing. Remember to take your time and trust the process. Practice hitting a draw shot on the range before using it out on the course. Over time, you will become more comfortable with the steps and be able to incorporate a draw shot into your game effectively.
How to Hit a Draw with a Driver | A Step-by-Step Guide
Here is the step-by-step approach for hitting a draw with a driver.
Step 1. Aim Your Hips and Shoulders to the Right: For a draw shot, you want your hips and shoulders to be aimed slightly to the right of your target. This setup will help promote an inside-out swing path, which is crucial for hitting a draw. Moreover, the ball position to hit a draw with the driver depends on your stance.
Step 2. Close Your Clubface: Closing your clubface at the address will also help promote a draw shot. A common mistake is to have an open clubface, which leads to a fade shot. Make sure your clubface is pointing to the right of your target when you set up.
Step 3. Swing from the Inside: To hit a draw, you need to swing the club from the inside. This means your clubhead should approach the ball from inside the target line. Focus on starting your downswing by moving your lower body toward the target.
3 Drills for Hitting a Draw with Driver
|Drill #1: The Alignment Stick Drill
1. Place an alignment stick on the ground parallel to your target line.
2. Put another alignment stick just outside your ball, running perpendicular to the first stick.
3. Position your feet so that they are aimed at the stick outside the ball (i.e., to the right of your target).
4. Practice hitting shots while maintaining this setup.
|Drill #2: The Tee Box Drill
1. Set up as you normally would on the tee box.
2. Place a tee about 12 inches behind your ball.
3. Try to hit your ball without hitting the tee behind it.
4. Focus on swinging from the inside.
|Drill #3: The Impact Bag Drill
1. Lay out an impact bag (or a pillow) about 2-3 feet in front of you.
2. Hit shots while trying to make contact with the bag.
3. Focus on keeping your clubface closed at impact.
4. After hitting the bag a few times, take a swing without the bag and try to replicate the same feeling.
How to Hit a Draw with Irons?
You can use irons to hit a draw shot by following these steps but make sure you fix the issue of irons pulling left in your setup as it is one of the reasons for failure in drawing a shot.
Step 1: Align your Body and Clubface. The first step to hitting a draw with irons is to align your body and clubface correctly. Take your normal stance and aim the clubface slightly right of your target. At the same time, position your body to the left, aiming left of the target. This setup will help you to swing in to out.
Step 2: Swing in to out. When hitting a draw with irons, the swing path is crucial. You must swing in-to-out, which means the club head should approach the ball from inside the target line and move towards the outside of the line through the impact zone.
Step 3: Close the Clubface Slightly. Closing the clubface slightly at setup will help create the right conditions for hitting a draw. Remember not to exaggerate this movement as it can lead to a hook.
Step 4: Follow Through in the Right Direction. After making contact with the ball, ensure that you follow through in the right direction. The club head should come around your body, finishing high over your shoulder.
3 Drills for Hitting a Draw with Irons
|Drill #1: Swing Path Drill
1. Place an alignment stick about 1.5 feet away from the ball, parallel to your target line.
2. Now, take a golf draw stance and hit the ball over the stick to the right.
3. Ensure the stick is positioned so you have to swing the club from the inside to the outside.
4. Repeat this drill until you consistently hit the ball over the stick.
|Drill #2: Clubface Control Drill
1. Take your normal stance and grip the club slightly stronger than normal.
2. Practice taking half swings and focusing on controlling the clubface.
3. Gradually increase the length of your swing and continue to focus on controlling the clubface.
4. Practice hitting draw shots with different clubs and gradually increase the difficulty.
5. Take your new draw shot to the course and watch as your scores improve.
|Drill # 3: Swing Plane Drill
1. Stand normally, but place a basketball or soccer ball under your right arm.
2. Focus on keeping your right arm close to your body and maintaining a steeper swing path.
3. Take a practice swing and feel the ball remaining tight against your body throughout the swing.
4. Practice hitting draw shots with the ball under your right arm.
5. Remove the ball and take your new draw shot to the course.
As a personal anecdote, I used to struggle with hitting a draw with my irons. But once I learned these tips and drills, my shots improved drastically. Now, I confidently hit a draw shot whenever it’s needed on the course.
How to Draw a Golf Ball?
I know that drawing the ball can be a real game-changer. It’s not just useful on those tricky shots where you need to curve around trees, either. A well-executed draw can give you that extra distance and control you need to make the shot of your life. Here are my step-by-step instructions for how to draw a golf ball with precision and expertise.
1. Start with Proper Alignment. Position yourself parallel to the target, with your feet, hips, and shoulders aligned left of the target for a right-handed golfer or vice versa for lefties.
2. Aim your Clubface to the Right of the Target. The more open your clubface, the more exaggerated the draw will be. Aim accordingly with the amount of draw you are aiming for.
3. Take your Backswing. Make sure it’s smooth and on-plane. Keep your head steady and your arms relaxed.
4. Shift your Weight Forward. As you begin your downswing, shift your weight onto your front foot.
5. Rotate your Wrists. As you swing through the ball, rotate your wrists to close the clubface, which will impart spin on the ball and cause it to draw.
6. Follow Through. Finish your swing with a high follow-through and a balanced stance.
Remember, practice makes perfect. Try these steps on the driving range until you get comfortable and consistent with the draw shot. In my experience, paying attention to alignment and proper technique is key to mastering this technique. Through regular practice and patience, you’ll be drawing the ball like a pro in no time.
Golf Balls Dirty?? Follow the Best Ways to Wash Golf Balls
How to Fix a Draw in Golf?
A draw can be a powerful shot, but it can also lead to inconsistent results if not managed properly. Here are some pointers that I have found to be effective in fixing a draw:
1. Adjust Your Stance
One of the first things to check when trying to fix a draw is your stance. If your stance is too closed, then it will promote an inside-out swing path, which will cause the ball to draw. To fix this, try opening up your stance slightly. You can also experiment with your ball position for hitting a draw.
2. Focus on Swing Path
One of the biggest reasons for a draw is an overly inside-out swing path. This can be caused by several factors such as effects of ball position at address, improper grip, club face angle, etc. If this is the case, I suggest practicing with a training aid that helps you develop a more neutral swing path. You can also work with your coach or instructor to develop a swing that produces straighter shots.
3. Experiment with Different Clubs
Sometimes, fixing a draw can be as simple as using a different club. For example, if you’re consistently drawing the ball with your driver, try using a 3-wood instead. This may help promote a more neutral swing path for a draw and result in hitting the golf ball straight.
In addition to these pointers, I have found that using some simple drills from shallow golf swing drills to reverse slice drills can also help fix a draw. For example, my favorite drill is the 10 O’Clock, 4 O’Clock Drill.
Visualize your body as a clock. Your head is 12, feet at 6, and the ball at 4 o’clock. Take your club back to 10 o’clock, pause, then swing down to four and strike. Generating right-to-left spin will add accuracy. Aim for precision, not power.
|Common Drills for Fixing a Draw
|10 O’Clock, 4 O’Clock Drill
|Develops a more neutral swing path
|Reverse Slice Drill
|Teaches you to swing from the inside
|Right-Hand Only Drill
|Improves swing path naturally
Draw Vs Fade: What’s the Difference?
One of the questions I get asked a lot by beginner golfers is, “What’s the difference between a draw and a fade shot?” Well, let me tell you, there’s a world of difference.
In simple terms, a draw shot curves to the left for right-handed golfers, and a fade shot curves to the right. But, the physics behind each shot is quite different. A draw shot has a clockwise spin and a fade shot has a counterclockwise spin. Learn more about the role of physics in golf with the Stanford University study. Brush your knowledge and upgrade your skills.
All in all, mastering both shots can greatly improve your game, so it’s worth taking the time to perfect each technique.
Ready to Hit a Draw Every Time !!!
Let me sum up the key takeaways from “How to Hit a Draw in Golf?” First, practice your grip, stance, and alignment regularly. Secondly, open your clubface and try to aim it to the right of the target line. Thirdly, swing from the inside-out, and focus on your follow-through. Finally, don’t forget to release the golf club and watch your ball soar toward the target.
Hitting a draw is not rocket science, but it does require some patience, practice, and a good sense of humor. As Woody Allen once said: “If you want to make God laugh, tell him about your plans.” So, loosen up, enjoy the game, and don’t forget to follow Golf Ace Nation for more tips, tricks, and good vibes. Happy drawing, folks!
Frequently Asked Questions
Q. Can you hit a draw with an open stance?
Yes, it is possible to hit a draw with an open stance. While it may not be the most natural stance for creating a draw, adjusting your grip and swing path can help you achieve the desired shot shape. Experimenting with different stances and swing mechanics can help you find the most comfortable and effective method for hitting a draw.
Q. What are the basics of hitting a draw?
Hitting a draw in golf can be a game-changer. To achieve this shot, it’s important to understand the basics. Start by aiming to the right of your target and aligning your body with your feet, hips, and shoulders slightly open. Focus on swinging the club from inside to out, with a closed face at impact.
Q. Do you aim right when hitting a draw?
It’s a common misconception that aiming right is necessary to hit a successful draw, but the truth is that it varies from golfer to golfer. Some professionals even say that aiming straight may be the best approach. It’s all about finding what works best for you and your swing.
Q. How do you position your feet to hit a draw?
The feet’ position to hit a draw is crucial. To achieve this shot, you will need to position your leading foot (left foot for right-handed players, right foot for left-handed players) slightly closer to the target line with your trailing foot positioned slightly farther away. This will help promote an inward swing path and a closed clubface at impact, resulting in a drawing ball flight.
Q. Where do you aim for a draw?
The decision of where to aim largely depends on the individual match, your opponent, and your strategy. Some players might choose to aim for a draw to avoid losing, while others prefer to take risks and aim for a win. The key is to assess the situation and make a calculated decision based on the circumstances at hand.