How to Measure Loft on Golf Club (With Steps, Tips & Expert Insights)

How to Measure Loft on Golf Club

Throughout my career as a golf expert, I have been asked repeatedly by fellow golfers how to measure loft on golf clubs & let me tell you, this question always brings me back to my early days on the course. I remember the first time I tried to measure the loft on my driver. My friends & I were on the 7th hole, & I was feeling pretty confident about my swing. But when I hit the ball, it went way off course. So, I started to wonder if my club was the problem.

I grabbed my trusty ruler & began to measure the loft on my driver. & that’s when the real problem began. I had no idea what I was doing.

Fortunately, after some trial & error, I’ve learned the proper way to measure loft on a golf club. So, if you’re feeling lost like I was, keep reading to learn the tricks of the trade.

How to Measure Loft on Golf Club?

I have been a golf enthusiast for over two decades now, & I can say with confidence that measuring loft in golf is one of the crucial aspects of the game. I’ve made the mistake of ignoring club loft in the past, & my shots suffered as a result. Along with my investments in the high cost of golf clubs, I got a lie & loft machine too. Using a lie & loft machine has been a game-changer for me in terms of achieving consistent shots. I would always recommend using a machine rather than relying on guesswork to set up your club loft as my golf clubs are so expensive & I do not want them to wear out with my grave mistakes.

One thing to keep in mind is that the machine is only as accurate as the person using it. Make sure that you take your time, double-check the settings, & get the right readings.

Now, how to measure loft on a golf club may seem like a complicated task, but I’m here to tell you that it’s not rocket science. You can follow a few steps to measure the loft of your golf club accurately, & I’m going to give you a step-by-step guide in easy golf terms explained for beginners & experts alike.

Step 1: Understanding What Loft in Golf is All About 

Before we dive into the measurement process, it’s vital to understand what loft in Golf means. In essence, a loft is the angle of the clubface that controls the ball’s initial launch angle. A clubface with a greater loft will produce more lift & height, whereas a clubface with a lower loft produces less height.

Step 2: Using the Lie & Loft Machine

A lie & loft machine is a tool used to measure the exact angles & positioning of a golf club’s head. The machine is designed to provide precise measurements of the loft, lie, & face angle of each club & allow you to adjust them accordingly to meet your playing needs. The USGA currently makes use of a Golf Instruments M-300 Loft-Lie Gauge to measure club loft.

To measure the loft of your golf club, you need to place the club on the lie & loft machine’s central axis with its face pointing upwards. Secure the club head with the holding device & make sure it is positioned correctly, aligning it with the machine’s sensors. Once in position, the machine will automatically display the club’s loft angle, which will be usually found on the shaft sticker, among other data points.

Step 3: Check the Reading

Check the reading provided by the machine. You can also put these readings under your personalized golf club size chart for future reference. The reading will give you the exact loft angle of the club. If you have a set of irons, check each club’s reading individually. Remember that small differences in a loft can have a significant impact on your shot, so it’s essential to ensure that each club is correctly set up.

That’s all for now on how to measure loft on a golf club but be with us till the end as we will break down more related aspects with our professional expertise to improve your game technicalities. 

How to Determine Lie Angle for Irons?

I once played with clubs that had an incorrect lie angle, causing me to hit shots inconsistently & affecting my overall performance. I visited a professional fitter & received a personalized fitting session that improved my game significantly. I learned the importance of having a proper lie angle, & now I make sure to get a fitting session whenever I need to replace my clubs. Do golf clubs wear out with such mistakes & what do we need to do?

To get all such answers  & for your convenience, check the table below on how to determine the lie angle for irons along with my personal experiences & a few stats to help you all out.

StepsInstructionsPersonal Stats & Experience
Understand the concept of lie angleAs a seasoned golfer, I know that lie angle is the angle between the shaft of the golf club & the sole or ground at the address position. It is important to determine the right lie angle to ensure optimal ball flight & accuracy.I got to know about the concept of lie angle from my Coach Mr. Andy Edwards & from that day, I have been taking care of this valuable concept in my golf game each & every day.
Determine your heightMeasure your height without shoes on a flat surface. This measurement will be used to estimate the ideal lie angle for your irons.For example, I am 5’9″ without shoes.
Calculate your wrist-to-floor measurementStand barefoot with your arms by your side & measure the distance from your wrist (where it bends) to the floor. This will give an estimate of the ideal lie angle for your irons.My wrist-to-floor measurement is 35 inches.
Use a lie board or impact tapePlace a piece of lie board or impact tape on the sole of your iron & hit a few shots. This will show the impact mark on the lie board or impact tape, & you can adjust the lie angle accordingly.When I first used a lie board, my irons were consistently hitting toward the toe, indicating that my clubs were too upright.
Make the necessary adjustmentsDepending on the impact mark on the lie board or impact tape, adjust the lie angle up or down.To correct my too-upright clubs, I had to adjust my 7-iron-degree lie angle to become 1-degree flatter.
Check your adjustmentsAfter making the necessary adjustments, hit another shot with the lie board or impact tape to confirm the adjustment has improved the ball’s flight & accuracy.After adjusting my clubs, I hit a few more shots & the impact mark showed more consistent strikes at the center.
Repeat the process if necessaryIt may take a few adjustments to find the perfect lie angle for your irons, so don’t be afraid to repeat the process if necessary.Sometimes it takes a little bit of trial & error to find the right lie angle for your irons.
Seek professional helpIf you’re having difficulty determining the right lie angle for your irons, seek professional help from a club fitting expert. They can help you identify any swing flaws or physical limitations that may affect your lie angle.A club fitting expert helped me fine-tune my lie angles & it greatly improved my ball flight & overall performance on the course.

Also, The USGA and R&D have rigorously tested and validated the accuracy of any of their measuring methods to ensure that all golf clubs meet the same standards.

How to Measure Loft Angle on Golf Club at Home?

During my early playing days, I had trouble with my irons & couldn’t seem to pinpoint why my shots were short or erratic. After measuring my club angles with all the clubs in the golf bag, I found that my irons were too flat, resulting in lower ball flight & shorter distances. Making a small loft angle adjustment to my club set significantly improved my ball flight & increased my distance on iron shots.

Bringing this experience, one of the most common questions I get asked is, “How to measure loft on a golf club at home?” Well, the good news is that measuring the loft angle at home is simple & easy, & here is the process step by step.

Step 1: Gather the Necessary Tools

To measure the loft angle on your golf club at home, you will need the following tools:

  • Your Golf Club
  • Ruler
  • Golf Club Loft Protractor
  • Level
  • Masking Tape

Step 2: Secure Your Golf Club

To ensure your measurements are accurate, secure your golf club to a table or work surface using masking tape. This will prevent the club from moving during the measuring process.

Step 3: Place Level on Clubface

Using your level, place it on the clubface to ensure it is perpendicular to the ground. Make sure to position the level along the center of the clubface. This will ensure an accurate measurement of the loft angle.

Step 4: Measure Angle with Golf Club Loft protractor

Place your golf club protractor on the clubface & align it with the centerline of the club head. Ensure that the base of the protractor is against the flat surface of the clubface. Once in position, read the angle & record it. Repeat the process for each club in your set. It’s essential to measure each club’s loft angle to ensure your set is consistent & dialed in.

Stat Check: As per USGA, putters cannot have lofts higher than 10 degrees. Negative lofts are permitted for putters. In contrast, negative lofts greater than 15 degrees do not qualify as “traditional & customary.”

General Loft Angle of Golf Clubs

As per my personal expertise & going in-depth on how to measure loft on the golf club, the table below shows a general range of loft angles for some of the most commonly used golf clubs. The range of loft angles can vary slightly among different manufacturers & models of golf clubs. Also, golfers may need to adjust their stance & swing to optimize their shots with each club.

It’s vital to note that the loft angle is just one factor that affects the flight of the ball, with other factors such as ball speed, spin rate, & launch angle also playing a significant role. Golfers should work with a coach or professional fitter to determine the best golf clubs & loft angles for their swing & playing style.

Golf ClubLoft Angle (Degrees)
Approach Wedge Loft50-54
A Wedge Loft48-52
Pitching Wedge Angle Loft44-49
4 Iron Loft22-26
5 Iron Loft26-30
6 Iron Loft30-34
7 Iron Loft34-38
8 Iron Loft38-42
9 Iron loft40-44

Note: The table does not follow any international standards & is totally dependent on my personal experience, my golf bag set up & a general measurement of loft angle for different clubs.

How to Measure a Loft Accurately | 3 Easy Tips for Golfers

As a seasoned golf enthusiast, I know how important it is to have accurate measurements when it comes to your golf club’s loft. When I first started playing, I struggled with getting consistent measurements until I learned a few tricks.

  • My first tip is to use a loft angle gauge to get precise measurements. Be sure to follow the manufacturer’s instructions carefully & avoid any kind of bend or abnormality in the clubface. 
  • Another important factor to consider is the weight of your golf clubs. The heavier the club, the more difficult it is for accurate measurements at home.
  • Lastly, don’t forget to use the proper technique when measuring your loft for accurate & consistent results. Trust me, these tips will help improve your game & make you a better golfer in the long run.
YouTube video via Leo Kim

Can You Change the Loft of a Golf Club?

After some research & personal experience, I can say that it is possible to change the loft angle of a golf club through bending. Bending golf clubs can be done by a professional club fitter or by using a bending machine. However, it is crucial to note that bending a club can alter its performance & durability. The change in a loft can also affect the ball’s flight & spin, which is why it is recommended to only make slight adjustments. 

It is essential to consult with a professional before altering your club’s loft angle. Many club manufacturers have strived to design adjustable drivers, which allow golfers to change the club’s loft in Golf without compromising its structure. All in all, changing the loft of a golf club is possible, but it requires caution & expert advice to ensure that it is done correctly.

How to Measure Loft on Golf Club | The Final Advice

Congratulations, my fellow golf enthusiasts! We have successfully tackled the question of how to measure loft on golf clubs. From using a sophisticated Lie & Loft machine at a professional golf store to taking a DIY approach with a simple golf club loft protractor at home, we have learned the ins & outs of measuring loft.

But let’s not get too technical here. At the end of the day, what matters is that we hit those glorious shots, sending the ball soaring through the air & straight onto the green (or at least not stuck in a sandpit). & measuring the loft of our clubs is one surefire way to help us do just that.

So, my advice to all the golfers out there: take the time to measure the loft of your clubs, whether you do it with a Lie & Loft machine or a golf club loft protractor. It will make a huge difference to your game, & you’ll be able to choose the best club for every shot. Take your angles, pick your clubs, polish your golf clubs & let them shine with your skills on the green.

And finally, if you want to stay up-to-date with all things golf, from tips & tricks to golf gear reviews, be sure to follow Golf Ace Nation. We’re your one-stop-shop for all your golf-related content, delivered with a mix of humor, sarcasm, & professionalism. Happy Golfing!

Frequently Asked Questions

Q1. What is the loft number on a golf club?

The numbers etched onto the back of the golf club heads are referred to as “loft numbers” & they indicate the angle between the clubface & the shaft. Essentially, the loft number determines how high up into the air the ball will fly when struck with the club. Also, loft numbers can be useful if you’re looking to aesthetically display your golf clubs on your wall.

Q2. How many yards are 2 degrees of the loft?

As a general rule of thumb, one degree of loft usually equates to roughly 3 yards of carry distance. Therefore, with 2 degrees of loft, you could potentially be looking at an extra 6 yards of carry compared to a lower-lofted club. However, it’s worth noting that there are many factors that can impact the distance your ball travels, such as the weather conditions, the type of ball you’re using, & the swing speed of your shot.

Q3. Should I get 9 or 10.5 loft?

The question of what loft to get on your club is a common one among golfers. The answer, however, is not a simple one. It all depends on your individual swing & ball flight. To determine the correct loft for your club, it’s best to visit a golf professional who can analyze your swing & make a recommendation based on your specific needs. Keep in mind that getting the correct loft can have a significant impact on your game, so it’s important to take the time to make the right decision. 

Q4. What is a strong loft in golf?

A strong loft in golf refers to the angle of the club head on the clubface. A club with a strong loft has a lower angle, which makes the ball travel farther & with less spin. This is because a lower angle creates a lower trajectory & less backspin, resulting in a ball that flies further once it hits the ground. Golfers looking for extra yardage off the tee or with their irons may opt for clubs with stronger lofts.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top